Land Guard 2Pcs Galvanized Raised Garden Bed Kit, Galvanized Planter Oval Large Metal Raised Garden Boxes Outdoor for Vegetables…

Sturdy and inexpensive. Perfect for a small garden.
I assembled ONE of these by myself in about 20 minutes. Had it in the yard with 5 yards of garden soil and three bell pepper plants in just under 30 minutes. (I had assembled a 4x2x1.5 model of this earlier today, so I knew how to get going.)Helpful notes for assembly:DO NOT TIGHTEN ANY SCREWS/NUTS UNTIL ALL ARE ASSEMBLED BY HAND.You will need an 11mm square open-end wrench and a phillips bit with drill (or screwdriver which I do not recommend)Assemble the end pieces first, by hand only (do not tighten ANY nuts until ALL are hand assembled), starting with just top screw and bottom screw until all plates are connected.Because the inside hole is in the middle of the indented part of the plates, I put my screws from the inside and the nuts on the outside, because I felt it would be easier to get to the nut with the wrench.Not sure how important it is, but the very end pieces are the outer most of the curve in the instructions. That is how I assembled mine.If a plate is taller than the one you are attaching to, then flip it over and see if it fits better. I had no difference between some plates with this set (I did have a slight 1/4″ difference in a plate with the 4x2x18″ from this same company).Attach the flat pieces to the curve assembly with a screw at top and one at bottom. Instructions show they go on the inside of the curved ends.Once you have the curved assembly attached to a flat plate, so now you have to halves assembled but not together, go back and hand start every screw to a nut at the connection points.I had one screw with messed up threads, but there were extras in the package. If a nut won’t go on by hand, flip the nut over and try again. If it still will not catch threads on the screw, try a different nut or screw.Now, to attach the two halves:This product has no stabilizing rods, but it doesn’t seem to need them with the height of only 12″. (The 4x2x18″ model has three rods that attach to the side plates for stabilization.)Connect the two halves of the unit with one screw/nut at the top, and one at the bottom on both sides.Once you have screws/nuts in every hole, use the 11mm open in wrench to hold the nut in place and set your drill to 10, add the phillips bit, and tighten the screw into the nut. Do this for every screw/nut assembly.

Impressive quality for the price
I’ve been wanting rings for quite some time but didn’t want to pay big box store prices. I got these to more or less organize my garden space vs doing raised beds so these will be buried partially in the soil. Assembly was tedious by hand (40 screws/nuts per planter) but would be a lot faster with power tools. I didn’t want to see the exposed threads so I put all mine facing in and had no issues tightening things (I used a 7/16 wrench to hold nut in place). I didn’t find the top and bottom of the panels to be sharp as the edges are folded and sealed but the side edges are sharp so take care. While they do seem sturdy there are no cross bars from side to side so I don’t know if the sides will bow out when filled with dirt but, being I’m partially burying them, I don’t foresee an issue.

Great backyard garden planter
These were easy to assemble but it took some time as there are many screws. Looks great in my back yard.The top rim is protected but the sides are sharp so be careful when assembling.

Satisfied
Great for the price. I will say, the shape/sturdiness has a little give when filling with dirt but not a big deal as it will settle over time with watering. This is the best deal I found for what I wanted, and am happy with them.

Garden planters.

Great product

i love these for garden