Beatbot AquaSense 2 Ultra Cordless Robotic Pool Cleaner for Complex Pools, Pool Mapping with AI Camera, 5-in-1 Cleaning, Smart Surface Parking, Pool Skimmer, Water Clarification – Midnight Blue

This is a great machine, new firmware changed it for me!
UPDATE****** Read entire review nowFirst off, I am not a “Vine” reviewer. Not say there is anything wrong with the program but this was a purchase made by me.I have been in constant conversations with Beatbot on the need to update their firmware. Finally a new version dropped, and this thing is no longer getting stuck on the shelf edge and the weir flap has changed its operation to keep stuff it already trapped from getting out. They did this by changing the timing of the flap opening and closing as it speeds up and slows down as it approaches edges or sides of the pool.It still REALLY cleans the bottom well and now no longer having stalled jobs or having it report “floating” when it shouldn’t.This is a solid product and I have updated my rating to reflect that. If you haven’t updated your firmware, please do so.Original Review BelowI was super excited to get this in my pool. I have a 16×32 rectangular pool with a tanning ledge. Nothing out of the ordinary.Pros: It REALLY sucks up the bottom debris and even handles the pollen, trapping it in the filter baskets. Climbs the walls and does the water line pretty well.Runtime was very good and recharge time was also very good.I attempted to contact support through the app and we did start conversations about firmware updates to resolve some of the minor issues I observed with the top water cleaning.I actually got an email from one of their techs that advised one of my suggestions was already in the development cycle for the next release of firmwareCons: need to release firmware to address minor issuesOnce I have a chance to load the new firmware and go through a cycle of cleanings, I think things will be fine.

As advertised
So far this thing is as advertised. It’s pricey but to me it’s worth the money. In the end I think it’s more about how long the battery lasts so time will tell if this is ultimately worth the price tag. The app works great. One thing to be aware of is you can’t communicate with the robot when it’s under water from the app. If you want to take it out of the pool or you want to change the cleaning mode you have to manually get it from the pool to the surface so it can pick up WiFi. Once it picks up WiFi you can control it from the app again. It runs on one charge an estimated 6 hours. Easy to charge too. It cleans the bottom of the pool and walls very well. Way better than the corded robot I had before. The pool skimmer feature is a bonus because I didn’t buy it for that. It works ok. To get the surface really clean it takes a really long time but generally gets the job done. Just be patient with this cleaning mode. In my pool the skimmer only works when the cover is opens when it’s closed it hits the cover and doesn’t go anywhere. One thing to note is that it is fairly heavy and you have to handle it every time you use it so be aware if that is an issue. One thing that I do is put it in at night and it’s is always waiting in the corner surface of the pool in the morning. All in all I’m very happy with it and the the little issues are not problems for me.

Excellent Customer Support & Impressive Technology
Customer support responded quickly and professionally to my concerns. I now understand that this robot is one of the most advanced on the market, with impressive all-in-one features and technology. I’m confident it will continue to improve with future updates. I can say I’m fully satisfied with the outcome of this transaction and the company’s commitment to standing behind their product.

Beatbot ultra
Works as advertised

This Beatbot Aqua Sense 2 Ultra Pool Robotic Cleaner comes in a big box that at first seemed overwhelming however everything is well marked so setup was fairly easy especially with the well written manual. There’s only 2 things to assemble. The rear stabilizers (legs) for the charging station (very easy) and 2 side brushes (probably not attached due to shipping of the product). We put the side brushes on as per the instructions however there was a package of screws labelled for the side brushes leftover (no mention of any screws required in the instructions) so I contacted customer service. I received a response in less than 24 hours stating that the screws are only extra parts. They also included an extra set of these brushes for future use.You also need to install the water clarifying cartridge. I couldn’t find replacement cartridges on Amazon.ca for this model but they do have them for the Pro model for $54.99 for 2 cartridges (note they don’t fit this machine) but hopefully they will carry them for this newer model in the future. You can get them directly from the manufacturer for $49.99 US but that’s a bit expensive for the Canadian consumer. Each cartridge will last for about a month if used weekly. The cartridge emits the solution automatically when on floor/bottom cleaning mode and also has an on/off button control for use as needed. The solution is a non toxic biodegradable formula using crushed sea shells too.The filter basket is very easy to remove to clean and it’s a double screened basket.The best feature is the AI sensors and camera that allows the robot to “see” debris like leaves etc. Hopefully no more missed areas. This newer model also has additional brushes for cleaning.Once everything is assembled we placed it on the charging station. It has a large pickup handle on one end. The station has a 6′ power cord. The green charging light fades on/off when charging. It took a little over 3 hours for a full charge. All the charging lights go out when charging is complete.It can be operated by the unit control panel or by a phone app. The main reason for using the app is for product updates and to set specific cleaning modes not offered on the unit panel.The operation panel allows the selection of different cleaning modes depending on your needs. Running battery time is 3-4 hours (our current one only does 45 minutes and only the floor/bottom). This machine will do the walls and the waterline (bathtub like ring) too. Upon completing the pool cleaning it will surface and”park” by the pool side.It then empties with an automatic drainage system so that it’s not too heavy to lift out. They also included a pole hook if it’s necessary to retrieve it if there’s any issue.They also included a heavy oxford fabric drawstring storage bag with a zippered side storage pocket.The robot approximate dimensions are as follows: 11″ high at the rear and 8″ high at the front (it slopes) 15″ wide and 17″ from the top handle to the bottom. It has some weight to it as well.It winter in Canada so unfortunately I will have to complete this review with a springtime update when we reopen our inground pool. I will adjust my rating if I’m not pleased with its operation.The current price $4,758 Canadian does seem overwhelming and it is cheaper if purchased directly from the US manufacturer. The manufacturer list price is $2,799 in US dollars. Not sure why there’s such a price difference.

Synopsis: I’ve tried plenty of automatic pool vacuums over the last 30 years, but I’ve never found one that truly does everything I need without extra hassles until, potentially, now. The Beatbot AquaSense 2 Ultra claims to handle steps, waterline, walls, floors, skimming, and water clarification all in one unit – basically everything you could want all in one unit, and systematically cleans so there’s not random missing spots or problem areas. Finally, something that actually seems capable of doing the full job, which is huge for someone who’s fed up with random cleaning patterns and missed spots. However, admittedly, it’s still winter, so I haven’t had the chance to actually test it in my own pool yet. I’ve only inspected it, read the spec sheet, and done a ton of research (including checking out prior Beatbot models. I’ve also used the pro model that a friend has and was impressed with it.As it is, this is my preliminary review which I will update after I’ve had a chance to test it fully. So, as it stands, I’ll cover what I like so far, what I’m a bit unsure about, and why I think it might still be worth the rather eye-popping price tag currently at $4758. I’ll give it a full test in the spring, and if it doesn’t blow me away, I’ll be sure to update my thoughts.I’ll start with the basics, then move on to performance features, some potential downsides, and my final preliminary impressions.Setup & First Impressions: The AquaSense 2 Ultra looks pretty cool and sleek despite. However, it is pretty heavy, weighing in at just over 13kg. It’s cordless and has a big 13,400 mAh battery. It takes about 4.5 hurs to charge, and run times varies depending on the task – up to 10 hours if it’s mostly surface-skimming, or around 4.5 hours on a full floor-cleaning or wall cycle. This should be ample for most pools. Beatbot suggests that the battery should be capable of cleaning 320 square meters (3,444 square feet) pools in a single cycle. It’s also capable of operating up to 9.84 feet deep.One thing I really like right off the bat, apart from all the technology in this thing, is the “surface parking” and “one-touch app retrieval” feature. Once it’s done cleaning (or if the battery runs low), it automatically floats over to a designated spot near the water’s edge. This is super convenient and means I won’t have to fish around with a hook and haul up a waterlogged machine from the deep end, which is a pain that I’ve often had to do with other auto cleaners I’ve tried. It’s may seem like a small detail, but it’s definitely a friction point, which should save me time and frustration.Performance & Features: Even though I haven’t tested it in my own pool, I’ve delved pretty deeply into what the AquaSense 2 Ultra promises, and am basing it on my experiences with the pro model which is similar, albeit not as advanced as the ultra. The ultra’s got a 5-in-1 cleaning system (water surface, waterline, floor, walls, and water clarification). According to Beatbot, the device uses a combination of AI cameras, ultrasonic sensors, and infrared detection (HybridSense AI Pool Mapping) to actually map your pool, detect leftover debris, and systematically clean every inch. I’ve had past cleaners I’ve owned that just sort of wandered randomly until time was up, leaving me to manually clean the missing and problem spots. This would require me to pull out the vacuum, etc.. and really detracted from the whole ‘automatic’ feature. The Beatbot Ultrat should in theory, “learn” my pool and plan its route, and cleaner the whole poolI’m intrigued, and a little skeptical, of the dual side brushes, which are supposed to help funnel floating debris or gunk at the edges into the main suction path. This is something that I find some robotic cleaners struggle with, and in theory should help this one out a bit (we’ll see) though in truth i’m less concerned with surface skimming.It also has a clarifier system (ClearWater™) which is handy but not that economical. The idea is that it releases small amounts of eco-friendly clarifying agents to clump finer particles, which the filter then traps. If you live somewhere with a lot of fine dust and debris blowing into the pool, that could really help improve the water quality. That said, the drawback is the cost. You can buy a bottle clarifier that will last several seasons for a fraction of the price of the beatbot clarifier cartridge. That said, it may be worth it for those looking for the true all in one solution.Price & Value: At $4758, it’s undeniably in the premium range. But if it legitimately does the complete bottom, sides, steps and waterline scrubbing, as well as surface skimming, that might well be worth the investment—especially if you factor in your time and/or the cost of a pool service over the long haul. If you’re someone who might only want basic floor cleaning, you can find cheaper alternatives, but you’ll have to supplement them. But for me, I’m getting older, and after going through so many cleaners that only do half the job, I’m thinking the math works out for ease of maintenance for those looking for a consistently clean poolSpecs Overview:-Cordless with a 13,400 mAh Lithium Ion battery-Cleaning Coverage Areas: Water surface, floor, walls, waterline-Pool Compatibility – Above-ground and in-ground pools of all shapes up to about 320 square meters / 3,444 square feet in one cycle-Sensors: 27 advanced sensors, including an AI camera with dual TOF sensors, 2 infrared sensors, and 4 ultrasonic sensors-Motors: 11 motors for drive, suction, brushes, etc.-Two Brush Systems: Four roller brushes plus a dual side brush system for surface debris and corners-Suction Power: 5500 GPH (gallons per hour)-Battery Capacity: 13,400 mAh lithium-ion-Runtime – Up to 10 hours for surface cleaning; 5 hours for floor cleaning; 4.5 hours for walls and waterline cleaning-Charging Time- Approximately 4.5 hours to fully charge-Filtration – Dual basket system (4.0L and 3.7L capacities) with a filters capable of capturing debris as small as 150μm-Dimensions: 1.49 ft (L) x 1.44 ft (W) x 0.91 ft (H). That’s approximately 454 mm x 439 mm x 278 mm.-Weight: 13.2 kg-IP Rating: IP68 for the robot itself and IPX4 for the charging dock-Warranty: 3 years-Other Noteworthy Features: AI Cruise Debris Detection, HybridSense AI Pool Mapping, ClearWater natural water clarification, surface parking, app navigation/control, automotive-grade UV protectionFinal Thoughts (for now): From what I can tell, this is the first robotic cleaner that appears to checks off EVERY box on my wish list: mapping technology to avoid missing spots, actual step-cleaning, waterline scrubbing, a solid app with targeted cleaning, and even surface skimming. The convenience mapping, waterline scrubbing, and surface parking features alone makes a big difference. Extra features like the clarifier system might not be on my list, but could be a hidden gem for those that have to deal with fine sediment and looking for the complete cleaning package.The obvious caveat: I haven’t run it in my own pool yet, so I can’t vouch for how smoothly all these features will work in practice. I’ve been impressed with the design and the technology on paper, but the real test will come when I toss it in the pool this spring. If it doesn’t deliver on these promises, you can bet I’ll be back with an update. That all said, I have had some experience with the pro model, and was very impressed. These two share similarities so I’m expecting the performance to be on par if not better which has me excited.For now, if you’re looking for a high-end, do-it-all solution, the AquaSense 2 Ultra is the one to keep an eye on—if you can handle the price of admission. That said, it make sense for those that place a premium price on their own time, and are looking for a consistently clean pool. It’s also certainly cheaper than a long-term pool service, and should give you a level of automated cleaning that older or less advanced models can’t match. Once the weather warms up and I open the pool, I’ll put it through its paces and provide an update!

This Beatbot Aquasense 2 Ultra pool cleaner is an amazing piece of technology.Its currently winter here in Canada so I wasn’t able to use the robot on my own personal pool, what I did instead was take it to a local hotel and tested it out in their indoor pool, sadly I was told that I wouldn’t be allowed to take any pictures due to protecting the privacy of other guests using the pool at the time.This is the top of the line premium pool cleaner and is reviewed positively around the web so I was really excited to try it out. The Ultra version gets you the AI pool mapping and debris detection, more sensors, more motors, and the larger battery for longer runtime. It’s a five in one system that will clean the floor of your pool, the walls, the waterline, the surface and also provides water clarification. For the water clarification, the whole package does come with the little blue clarifying agent kit but just one, and once it runs out you will have to buy replacements separately which run $49.00 for two pieces on the beatbot website. To be honest though, they aren’t required for the pool cleaner to function and unless you pool is super dirty on a regular basis, I personally don’t think they are needed.The multi zone mode is super impressive to watch in action when the robot crawls up the pool walls and over lips and edges in the pool and its ability to skim across the surface of the water is amazing because the side brushes are a game changer and I can totally see how leaves and other debris will get sucked into making it more efficient at cleaning outdoor pools. The debris basket is 4 liters and is easy to access, empty and clean. It’s dual layer for different size of debris that the cleaner picks up.The robot itself is 29lbs which is pretty heavy but when the robot is done cleaning the pool it parks itself at the surface of the water and will self drain itself so when you pick it up it doesn’t weight more being full of water. The large grip handle on the top is really helpful getting it in and out of the water.The version I got came with the charging base, and it’s convenient to have as you can just pick up the robot and place it on its dock for recharging without having to mess around with wires and ports.The app worked ok and its pretty similar to the apps of the robot vacuums I’ve used in the past, pretty basic. It lets you choose your modes, set cleaning parameters, shows your remaining battery percentage and current runtimes. Allows you to do spot cleaning and define custom modes.The 3 year warranty is a really nice touch especially for something that is used outdoors and underwater, and that length of a warranty on tech items is pretty rare these days.Can’t wait until summer to get this thing in my own pool as it worked very well in the indoor pool I tested it out in, Yes, the ultra is pretty expensive but it comes packed with a ton of cool features and it saves you money from hiring a company to come clean your pool for you and saves you time if you’ve just been doing it yourself.